| SR. NO. | FURTHER DESCRIBED AS | CAT. NO. |
|---|
| PRODUCT NAME |
|---|
| | | |
| 1 | MEASUREING RULER FOR FEMUR NAIL - 450 mm/2 mm | SO15.INS.0001 |
| 2 | CANNULATED BONE AWL FOR FEMUR - 250 mm/8 mm | SO15.INS.0002 |
| 3 | TISSUE PROTECTING PLATE FOR FEMUR - 150 mm/2 mm | SO15.INS.0003 |
| 4 | CANNULATED PROXIMAL REAMER FOR FEMUR NAIL - 295 mm/13.8mm | SO15.INS.0004 |
| 5 | STOPPER FOR REAMER - 150 mm/11 mm | SO15.INS.0005 |
| 6 | HEX HEAD L & KEY SW3 - 80 mm/3 mm | SO15.INS.0006 |
| 7 | T- HANDLE WITH QUICK COUPLING - 150 mm/8 mm | SO15.INS.0007 |
| 8 | T HANDLE CANNULATED SHAFT FOR GUIDE WIRE - 450 mm/2 mm | SO15.INS.0008 |
| 9 | CANNULATED FLEXIBLE SHAFT FOR FLEXIBLE REAMER (FEMUR) - 485mm/8mm | SO15.INS.0009 |
| 10 | CANNULATED REAMER HEAD 8.5MM - 15 mm/8.5 mm | SO15.INS.0010 |
| 11 | CANNULATED REAMER HEAD 9.0MM - 15 mm/9.0 mm | SO15.INS.0011 |
| 12 | CANNULATED REAMER HEAD 9.5MM - 15 mm/9.5 mm | SO15.INS.0012 |
| 13 | CANNULATED REAMER HEAD 10.0MM - 15 mm/10.0 mm | SO15.INS.0013 |
| 14 | CANNULATED REAMER HEAD 10.5MM - 15 mm/10.5 mm | SO15.INS.0014 |
| 15 | CANNULATED REAMER HEAD 11.0MM - 15 mm/11.0 mm | SO15.INS.0015 |
| 16 | CANNULATED REAMER HEAD 11.5MM - 15 mm/11.5 mm | SO15.INS.0016 |
| 17 | CANNULATED REAMER HEAD 12.0MM - 15 mm/12.0 mm | SO15.INS.0017 |
| 18 | CANNULATED REAMER HEAD 12.5MM - 15 mm/12.5 mm | SO15.INS.0018 |
| 19 | CANNULATED REAMER HEAD 13.0MM - 15 mm/13.0 mm | SO15.INS.0019 |
| 20 | WIRE PUSHER - 150mm/7 mm | SO15.INS.0021 |
| 21 | MAIN JIG FOR FEMUR NAIL - 150mm/20 mm | SO15.INS.0022 |
| 22 | CONICAL BOLT - 150 mm/8.0 mm | SO15.INS.0023 |
| 23 | ADOPTER FOR FEMUR - 150 mm/11 mm | SO15.INS.0024 |
| 24 | EXACTOR ROD - 450 mm/9 mm | SO15.INS.0025 |
| 25 | HAMMER - 100 mm/50 mm | SO15.INS.0026 |
| 26 | CONNECTING BOLT FOR EXACTOR ROD - 11 mm/8.0 mm | SO15.INS.0027 |
| 27 | PROXIMAL JIG & DISTAL JIG ARM FOR LONG NAIL (LEFT / RIGHT) - 150 mm/20 mm | SO15.INS.0028 |
| 28 | CONNECTING BOLT FOR PROXIMAL JIG - 40 mm/8 mm | SO15.INS.0029 |
| 29 | DISTAL JIG ARM FOR FEMUR NAIL - 460 mm/20 mm | SO15.INS.0030 |
| 30 | CONNECTING BOLT FOR DISTAL JIG FOR FEMUR - 40 mm/5 mm | SO15.INS.0031 |
| 31 | DISTAL TARGET DEVICE FOR FEMUR - 460 mm/20 mm | SO15.INS.0032 |
| 32 | HEX HEAD L & KEY SW5 - 120 mm/5 mm | SO15.INS.0033 |
| 33 | MAIN SLEEVE SHORT - 150 mm/11.0 mm | SO15.INS.0034 |
| 34 | POINTER SHORT - 150 mm/8.0 mm | SO15.INS.0035 |
| 35 | DRILL SLEEVE WITH HANDLE 5.2MM - 150 mm/8 mm | SO15.INS.0036 |
| 36 | DRILL BIT 5.2MM WITH QUICK COUPLING - 150 mm/5 mm | SO15.INS.0037 |
| 37 | DRILL BIT 5.2MM FLAT TIP WITH T- HANDLE - 150 mm/8 mm | SO15.INS.0038 |
| 38 | POSTIONING ROD WITH T- HANDLE - 200 mm/11 mm | SO15.INS.0039 |
| 39 | COMPRESSION LOCKING BLOCK (9.0MM/10.0MM) - 200 mm/9.0/10.0 mm | SO15.INS.0040 |
| 40 | COMPRESSION LOCKING BLOCK (11.0MM/ 12.0MM) - 200 mm/11.0/12.0 mm | SO15.INS.0041 |
| 41 | MAIN SLEEVE LONG - 150 mm/11 mm | SO15.INS.0042 |
| 42 | POINTER LONG - 175 mm/8 mm | SO15.INS.0043 |
| 43 | DRILL SLEEVE WITH HANDLE 4.0MM - 150 mm/4 mm | SO15.INS.0044 |
| 44 | DRILL BIT 4.0MM - 300 mm/4 mm | SO15.INS.0045 |
| 45 | STOPPER FOR DRILL BIT - 11 mm/11 mm | SO15.INS.0046 |
| 46 | DEPTH GAUGE - 11 mm/11 mm | SO15.INS.0047 |
| 47 | SCREW DRIVER WITH T- HANDLE SW3.5 - 300mm/3.5 mm | SO15.INS.0048 |
| 48 | SCREW DRIVER WITH QUICK COUPLING SW3.5 - 300mm/3.5 mm | SO15.INS.0049 |
| 49 | GUIDE WIRE WITH BALL TIP 2.5 MM - 1000mm/2.5mm | SO15.INS.0050 |
| 50 | GUIDE WIRE WITH OUT BALL TIP 2.5MM - 1000mm/2.5mm | SO15.INS.0051 |
| 51 | CONTAINER FOR FEMUR INTERLOCKING NAIL INSTRUMENT SET | SO15.INS.UFN |