| SR. NO. | FURTHER DESCRIBED AS | CAT. NO. |
|---|
| PRODUCT NAME |
|---|
| | | |
| 1 | MEASURE RULER FOR TIBIA NAIL - 450 mm/20 mm | SO15.INS.0061 |
| 2 | GUIDE PIN THREAD TIP 3.2MM - 350 mm/302mm | SO15.INS.0062 |
| 3 | CANNULATED BONE AWL FOR TIBIA - 250mm/8 mm | SO15.INS.0063 |
| 4 | WIRE PUSHER - 150mm/7mm | SO15.INS.0064 |
| 5 | PROTECTING SLEEVE - 150mm/8.0mm | SO15.INS.0065 |
| 6 | GUIDE PIN SLEEVE - 150mm/2mm | SO15.INS.0066 |
| 7 | CANNULATED PROXIMAL REAMER FOR TIBIA - 210mm/16.5 | SO15.INS.0067 |
| 8 | T- HANDLE WITH QUICK COUPLING - 100mm/200mm | SO15.INS.0068 |
| 9 | SOFT TISSUE PROTECTOR - 120mm/2mm | SO15.INS.0069 |
| 10 | T HANDLE CANNULATED SHAFT FOR GUIDE WIRE - 300mm/9mm | SO15.INS.0070 |
| 11 | GUIDE WIRE WITH BALL TIP 2.0 MM - 1000mm/2.5mm | SO15.INS.0071 |
| 12 | GUIDE WIRE WITH OUT BALL TIP 2.0 MM - 1000mm/2.0 mm | SO15.INS.0118 |
| 13 | GUIDE WIRE WITH BALL TIP 2.5 MM - 1000mm/2.5 mm | SO15.INS.0124 |
| 14 | GUIDE WIRE WITH OUT BALL TIP 2.5 MM - 1000mm/2.5 mm | SO15.INS.0125 |
| 15 | CANNULATED SHAFT FOR FLEXIBLE REAMER (TIBIA) - 450 mm/8 mm | SO15.INS.0072 |
| 16 | CANNULATED REAMER HEAD 7.5MM - 20 mm/7.5 mm | SO15.INS.0073 |
| 17 | CANNULATED REAMER HEAD 8.0MM - 20 mm/8.0 mm | SO15.INS.0074 |
| 18 | CANNULATED REAMER HEAD 8.5MM - 20 mm/8.5 mm | SO15.INS.0075 |
| 19 | CANNULATED REAMER HEAD 9.0MM - 20 mm/9.0 mm | SO15.INS.0076 |
| 20 | CANNULATED REAMER HEAD 9.5MM - 20 mm/9.5 mm | SO15.INS.0077 |
| 21 | CANNULATED REAMER HEAD 10.0MM - 20 mm/10.0 mm | SO15.INS.0078 |
| 22 | CANNULATED REAMER HEAD 10.5MM - 20 mm/10.5 mm | SO15.INS.0079 |
| 23 | CANNULATED REAMER HEAD 11.0MM - 20 mm/11.0 mm | SO15.INS.0080 |
| 24 | CANNULATED REAMER HEAD 11.5MM - 20 mm/11.5 mm | SO15.INS.0081 |
| 25 | CANNULATED REAMER HEAD 12.0MM - 20 mm/12.0 mm | SO15.INS.0082 |
| 26 | CANNULATED REAMER HEAD 12.5MM - 20 mm/12.5 mm | SO15.INS.0083 |
| 27 | CANNULATED REAMER HEAD 13.0MM - 20 mm/12.5 mm | SO15.INS.0084 |
| 28 | MAIN JIG FOR TIBIA NAIL - 150mm/20mm | SO15.INS.0085 |
| 29 | COMPRESSION BLOCK - 150mm/8mm | SO15.INS.0086 |
| 30 | CONICAL BOLT - 50mm/8mm | SO15.INS.0087 |
| 31 | SLIDING ADAPTER - 150mm/8mm | SO15.INS.0088 |
| 32 | ADAPTOR ROD - 150mm/8mm | SO15.INS.0089 |
| 33 | COMBINATION SPANNER SW11 - 150mm/11mm | SO15.INS.0090 |
| 34 | WRENCH L SHAPE - 150mm/8mm | SO15.INS.0091 |
| 35 | EXTRACTOR ROD FOR TIBIA - 350mm/8mm | SO15.INS.0092 |
| 36 | CONNECTING BOLT FOR EXTRACTOR ROD - 11mm/9mm | SO15.INS.0093 |
| 37 | SCREW DRIVER WITH T HANDLE SW6.5 - 300mm/6.5mm | SO15.INS.0094 |
| 38 | SCREW DRIVER FOR CONICLAL BOLT T HANDLE SW6.5 - 300mm/6.5mm | SO15.INS.0095 |
| 39 | SLIDING HAMMER WITH FIBER HANDLE - 300mm/50mm | SO15.INS.0096 |
| 40 | PROXIMAL JIG FOR TIBIA - 100mm/20mm | SO15.INS.0097 |
| 41 | CONNECTING BOLT FOR PROXIMAL JIG - 35mm/9.0mm | SO15.INS.0098 |
| 42 | MAIN SLEEVE - 150mm/11mm | SO15.INS.0099 |
| 43 | POINTER - 150mm/9mm | SO15.INS.0100 |
| 44 | DRILL SLEEVE WITH HANDLE 3.0MM - 150mm/3.0mm | SO15.INS.0101 |
| 45 | DRILL SLEEVE WITH HANDLE 4.0MM - 150mm/4.0mm | SO15.INS.0102 |
| 46 | DRILL BIT 3.0MM - 300 mm/3.0 mm | SO15.INS.0103 |
| 47 | STOPPER FOR DRILL BIT 3.0MM - 300 mm/3.0 mm | SO15.INS.0104 |
| 48 | DRILL BIT 4.0MM - 300 mm/4.0 mm | SO15.INS.0105 |
| 49 | STOPPER FOR DRILL BIT 4.0MM - 300 mm/4.0 mm | SO15.INS.0106 |
| 50 | HEX HEAD L & KEY SW5 - 200mm/5mm | SO15.INS.0107 |
| 51 | HEX HEAD L & KEY SW4 - 200mm/4mm | SO15.INS.0108 |
| 52 | DISTAL JIG ARM FOR TIBIA NAIL - 100mm/20mm | SO15.INS.0109 |
| 53 | CONNECTING BOLT FOR DISTAL JIG FOR TIBIA - 41mm/8mm | SO15.INS.0110 |
| 54 | DISTAL JIG FOR TIBIA - 400mm/20mm | SO15.INS.0111 |
| 55 | CONECTING BOLT FOR DISTAL TRAGET DEVICE - 40mm/20mm | SO15.INS.0112 |
| 56 | DRILL SLEEVE WITH HANDLE 5.8MM - 150mm/5.8mm | SO15.INS.0113 |
| 57 | DRILL BIT 5.8MM WITH QUICK COUPLING - 300 mm/5.8 mm | SO15.INS.0114 |
| 58 | DRILL BIT 5.8MM FLAT TIP WITH T- HANDLE - 300 mm/5.8 mm | SO15.INS.0115 |
| 59 | T HANDLE POSITIONING ROD (8.0MM/9.0MM/10.0MM) - 300mm/8/9/10mm | SO15.INS.0116 |
| 60 | T HANDLE POSITIONING ROD (11.0MM/12.0MM) - 300mm/11/12mm | SO15.INS.0117 |
| 61 | DEPTH GAUGE - 200mm/11mm | SO15.INS.0119 |
| 62 | SCREW DRIVER WITH T- HANDLE SW3.5 - 300mm/3.5mm | SO15.INS.0120 |
| 63 | SCREW DRIVER WITH QUICK COUPLING SW3.5 - 300mm/3.5mm | SO15.INS.0121 |
| 64 | SCREW DRIVER HOLDER SW3.5 (FOR NAIL CAP) - 300mm/3.5mm | SO15.INS.0122 |
| 65 | I - HANDLE WITH QUICK COUPLING - 300mm/3.5mm | SO15.INS.0123 |
| 66 | CONTAINER FOR TIBIA INTERLOCKING NAIL INSTRUMENT SET | SO15.INS.UTN |