| SR. NO. | FURTHER DESCRIBED AS | CAT. NO. |
|---|
| PRODUCT NAME |
|---|
| | | |
| 1 | MEASURE RULER | SO20.INS.0489 |
| 2 | GUIDE SLEEVE Ø16.5 | SO20.INS.0490 |
| 3 | PROXIMAL CANNULATED RIGID DRILL Ø16.5 X 3.2 MM | SO20.INS.0491 |
| 4 | WIRE SLEEVE Ø16.5 X 3.2 MM | SO20.INS.0492 |
| 5 | CANNULATED AWL | SO20.INS.0493 |
| 6 | PROTECTING PLATE | SO20.INS.0494 |
| 7 | OPEN WRENCH SW11 | SO20.INS.0495 |
| 8 | UNIVERSAL SCREWDRIVER, SW8 | SO20.INS.0496 |
| 9 | HANDLE(STAINLESS STEEL) | SO20.INS.0497 |
| 10 | CONNECTING BLOT M10*1.5/SW8 | SO20.INS.0498 |
| 11 | ADAPTOR | SO20.INS.0499 |
| 12 | DISTAL LOCKING SCREW SLEEVE | SO20.INS.0500 |
| 13 | DISTAL LOCKING SCREW DRILL GUIDE | SO20.INS.0501 |
| 14 | TROCAR Ø 4.3 | SO20.INS.0502 |
| 15 | GUIDE WIRE WITH THREAD TIP Ø 3.2X400 | SO20.INS.0503 |
| 16 | FIXED LENGTH CANNULATED DRILL BIT Ø10.6/ Ø 3.2 | SO20.INS.0504 |
| 17 | PROTECTOR | SO20.INS.0505 |
| 18 | DRILL BIT Ø 4.3 | SO20.INS.0506 |
| 19 | PROTECTOR Ø 4.3/SW3 | SO20.INS.0507 |
| 20 | DEPTH GAUGE | SO20.INS.0508 |
| 21 | WRENCH SW3 | SO20.INS.0509 |
| 22 | LOCKING SCREWDRIVER SW4 | SO20.INS.0510 |
| 23 | CLEANING PIN, TIP CURVE | SO20.INS.0511 |
| 24 | ENTEND ROD SW11 | SO20.INS.0512 |
| 25 | CANNULATED SCREWDRIVER FOR END CAP 2.8/SW4/SW11 | SO20.INS.0513 |
| 26 | LAG SCREW CANNULATED EXTRACTOR M7X1 LEFT/SW4.5 | SO20.INS.0514 |
| 27 | SLIDING HAMMER | SO20.INS.0515 |
| 28 | NAIL EXTRACTOR M10X1.5 | SO20.INS.0516 |
| 29 | WIRE PUSHER | SO20.INS.0517 |
| 30 | WIRE GUIDE | SO20.INS.0518 |
| 31 | GUIDE WIRE WITH BALL TIP, Ø 2.5/ Ø 4 | SO20.INS.0519 |
| 32 | FLEXIBLE REAMER SHAFT | SO20.INS.0520 |
| 33 | REAMER HEAD (Ø 8.5 TO Ø13) |
| 8.5 MM | SO20.INS.0521 |
| 9.0 MM | SO20.INS.0522 |
| 9.5 MM | SO20.INS.0523 |
| 10.0 MM | SO20.INS.0524 |
| 10.5 MM | SO20.INS.0525 |
| 11.0 MM | SO20.INS.0526 |
| 11.5 MM | SO20.INS.0527 |
| 12.0 MM | SO20.INS.0528 |
| 12.5 MM | SO20.INS.0529 |
| 13.0 MM | SO20.INS.0530 |
| 34 | REAMER HANDLE | SO20.INS.0531 |
| 35 | DITAL GUIDE BAR | SO20.INS.0532 |
| 36 | CONNECTING SCREW | SO20.INS.0533 |
| 37 | WRENCH SW5 | SO20.INS.0534 |
| 38 | PFN - I I I DISTAL GUIDE BAR | SO20.INS.0535 |
| 39 | CONNECTING SCREW | SO20.INS.0536 |
| 40 | DISTAL TARGET DEVICE | SO20.INS.0537 |
| 41 | POSITION ROD SLEEVE 10 MM X 8.1 MM | SO20.INS.0538 |
| 42 | DRILL SLEEVE 8.1 MM /5.2 MM | SO20.INS.0539 |
| 43 | TROCAR 8.1 MM | SO20.INS.0540 |
| 44 | DRILL BIT | SO20.INS.0541 |
| 45 | DRILL BIT WITH FLAT TIP | SO20.INS.0542 |
| 46 | LOCKING BLOCK | SO20.INS.0543 |
| 47 | POSITION ROD | SO20.INS.0544 |
| 48 | DRILL SLEEVE 8.2 MM / 4.3 MM | SO20.INS.0545 |
| 49 | LOCKING SCREW SLEEVE | SO20.INS.0546 |
| 50 | SCREWS GUIDE BAR | SO20.INS.0547 |
| 51 | PROXIMAL SLEEVE | SO20.INS.0548 |
| 52 | DEPTH GAUGE | SO20.INS.0549 |
| 53 | COUNTER TORQUE | SO20.INS.0550 |
| 54 | WIRE SLEEVE | SO20.INS.0551 |
| 55 | COMPRESSION STARTER DRILL | SO20.INS.0552 |
| 56 | COMPRESSION SCREW DRILL | SO20.INS.0553 |
| 57 | SCREW HOLDER OF COMPRESSION SCREWDRIVER | SO20.INS.0554 |
| 58 | COMPRESSION SCREWDRIVER | SO20.INS.0555 |
| 59 | SCREW HOLDER OF LAG SCREWDRIVER | SO20.INS.0556 |
| 60 | LAG SCREWDRIVER | SO20.INS.0557 |
| 61 | WRENCH | SO20.INS.0558 |
| 62 | CONTAINER FOR ELEGANT INTERTROCHANTERIC ANTEGRADE NAIL INSTRUMENT SET | SO20.INS.ITAN |