| SR. NO. | FURTHER DESCRIBED AS | CAT. NO. |
|---|
| PRODUCT NAME |
|---|
| | | |
| 1 | MEASURE RULER - 150mm/2mm | SO15.INS.1551 |
| 2 | PROTECTING SLEEVE - 150mm/8mm | SO15.INS.1552 |
| 3 | CANNULATED HOLE OPENER - 200mm/13mm | SO15.INS.1553 |
| 4 | CANNULATED BONE AWL - 150mm/13mm | SO15.INS.1554 |
| 5 | CANNULATED PROXIMAL REAMER - 250mm/9mm | SO15.INS.1555 |
| 6 | THREAD WIRE 3.2*300 - 300mm/3.2mm | SO15.INS.1556 |
| 7 | FLEXIBLE REAMER SHAFT - 450 mm/8 mm | SO15.INS.1557 |
| 8 | FLEXIBLE REAMER HEAD DIA 7.5 - 15 mm/15 mm | SO15.INS.1558 |
| 9 | FLEXIBLE REAMER HEAD DIA 8.0 - 15 mm/15 mm | SO15.INS.1559 |
| 10 | FLEXIBLE REAMER HEAD DIA 8.5 - 450 mm/8.5 mm | SO15.INS.1598 |
| 11 | FLEXIBLE REAMER HEAD DIA 9 - 450 mm/9.0 mm | SO15.INS.1599 |
| 12 | FLEXIBLE REAMER HEAD DIA 9.5 - 450 mm/9.5 mm | SO15.INS.1600 |
| 13 | FLEXIBLE REAMER HEAD DIA 10 - 450 mm/10.0 mm | SO15.INS.1601 |
| 14 | FLEXIBLE REAMER HEAD DIA 10.5 - 450 mm/10.5 mm | SO15.INS.1602 |
| 15 | FLEXIBLE REAMER HEAD DIA 11 - 450 mm/11.0 mm | SO15.INS.1603 |
| 16 | FLEXIBLE REAMER HEAD DIA 11.5 - 450 mm/11.5 mm | SO15.INS.1604 |
| 17 | FLEXIBLE REAMER HEAD DIA 12 - 450 mm/12.0 mm | SO15.INS.1605 |
| 18 | XPERT TIBIAL NAIL MAIN JIG (AP LOCKING) - 225mm/225mm | SO15.INS.1560 |
| 19 | CONICAL BOLT - 100mm/8mm | SO15.INS.1561 |
| 20 | COMPRESSION BOLT - 150mm/8mm | SO15.INS.1562 |
| 21 | CONICAL BOLT WRENCH SW6.5 - 150mm/8mm | SO15.INS.1563 |
| 22 | UNIVERSAL CONICAL BOLT WRENCH SW6.5 - 80mm/9mm | SO15.INS.1564 |
| 23 | SLIDING ADAPTOR - 250mm/8mm | SO15.INS.1565 |
| 24 | SLIDING ADAPTOR ROD - 100mm/100mm | SO15.INS.1566 |
| 25 | SLIDING HAMMER GUIDE ROD - 250mm/250mm | SO15.INS.1567 |
| 26 | SLIDING HAMMER - 250mm/250mm | SO15.INS.1588 |
| 27 | DISTAL JIG ARM FOR XPERT TIBIA NAIL - 375mm/375mm | SO15.INS.1568 |
| 28 | POSITIONG ROD - 150mm/150mm | SO15.INS.1569 |
| 29 | COMPRESSION BLOCK - 150mm/150mm | SO15.INS.1570 |
| 30 | DISTAL JIG - 200mm/200mm | SO15.INS.1571 |
| 31 | CONNECTING BOLT DISTAL JIG - 30mm/30mm | SO15.INS.1572 |
| 32 | SCREW DRIVER - 250mm/3.5mm | SO15.INS.1573 |
| 33 | PROXIMAL JIG FOR STRAIGHT LOCKING - 250mm/8mm | SO15.INS.1574 |
| 34 | PROXIMAL JIG FOR CROSS LOCKING - 80mm/9mm | SO15.INS.1575 |
| 35 | 3.2 DRILL BIT - 300 mm/3.2 mm | SO15.INS.1576 |
| 36 | DRILL BIT 4.0*300 - 300 mm/4.0 mm | SO15.INS.1577 |
| 37 | FLAT HEAD DRILL 5.2*220 - 220mm/5.2mm | SO15.INS.1578 |
| 38 | DRILL BIT 5.2*250 - 250 mm/5.2 mm | SO15.INS.1579 |
| 39 | MAIN SLEEVE 8.1/10*120 - 120mm/8.1mm | SO15.INS.1580 |
| 40 | 4.0 DRILL SLEEVE WITH HANDLE - 150mm/150mm | SO15.INS.1581 |
| 41 | 5.2 DRILL SLEEVE WITH HANDLE - 150mm/4.0 mm | SO15.INS.1582 |
| 42 | MAIN SLEEVE 11/8.6*120 - 150mm/8.6 mm | SO15.INS.1583 |
| 43 | 3.2 DRILL SLEEVE WITH HANDLE - 150mm/3.2 mm | SO15.INS.1584 |
| 44 | SLEEVE PIN 3.2*142 - 150mm/3.2 mm | SO15.INS.1585 |
| 45 | DEPTH GAUGE - 350mm/20 mm | SO15.INS.1586 |
| 46 | LOCKING SCREW WRENCH SW3.5 - 250mm/3.5 mm | SO15.INS.1587 |
| 47 | SOFT TISSUE PROTECTOR - 150mm/100 mm | SO15.INS.1589 |
| 48 | GUIDE WIRE WITH BALL TIP 2.5/3.9*1000 - 1000mm/10 mm | SO15.INS.1590 |
| 49 | GUIDE WIRE WITH OUT BALL TIP 2.5 MM - 1000mm/2.5 mm | SO15.INS.1609 |
| 50 | GUIDE WIRE WITH BALL TIP 2.0 MM - 1000mm/2.0 mm | SO15.INS.1610 |
| 51 | GUIDE WIRE WITH OUT BALL TIP 2.0 MM - 1000mm/2.0 mm | SO15.INS.1611 |
| 52 | T HANDLE CANNULATED SHAFT FOR GUIDE WIRE - 100mm/8 mm | SO15.INS.1591 |
| 53 | L & KEY 5.0 MM - 250mm/5 mm | SO15.INS.1592 |
| 54 | L & KEY 3.0 MM - 150mm/3 mm | SO15.INS.1593 |
| 55 | QUICK COUPLING I - HANDLE - 85mm/4 mm | SO15.INS.1594 |
| 56 | CONNECTING BOLT (LONG) - 50mm/9 mm | SO15.INS.1596 |
| 57 | CONNECTING BOLT (SHORT) - 50mm/9 mm | SO15.INS.1597 |
| 58 | GUIDE PIN HOLDER - 150mm/8 mm | SO15.INS.1606 |
| 59 | QUICK COUPLING T - HANDLE - 150mm/11 mm | SO15.INS.1607 |
| 60 | TOMY BAR (L- TYPE) - 150mm/3 mm | SO15.INS.1608 |
| 61 | SCREW DRIVER FOR NAIL CAP - 175mm/10 mm | SO15.INS.1612 |
| 62 | CONTAINER FOR ADVANCE TIBIA NAIL INSTRUMENT SET | SO15.INS.XTN |